1)Product: HSS Damaged Screw and Drill Bit Remover

Use with variable speed drill or 1/4" hex multi bit screwdriver

to remove damaged screw and drill bits

2)Operating instructions

a) determine the size screw or drill bit's head and choose the appropriate remover as marked on the case

b) insert extractor into drill chuck or hex screwdriver

c) set drill to "reverse" (Counterclockwise)

d) place revomver tip on center of screw or drill bit and press down maintaining pressure on the screw or drill bit. drill or screwdriver should be turning counterclockwise

Important: if using electric drill, apply only the lowest level of power so the chuck turns extremely slowly

e) remover will bite into the screw or drill bit and begin to turn the screw or drill bit out 

f)for stubborn screws: apply more pressure and pivot tool 5 or 10 degrees from centerline of screw or drill bit maintain a very slow speed on driver. do not increase speed of dril

3)Picture of damaged screw and drill bit remover